Skip to main content

日立高新技术在中国
地区/语言地区/语言 联系我们联系我们
  1. 首页
  2. 产品活动信息
  3. 先端产业部件
  4. Electronic Components
  5. 光通信用元件
  6. KELK公司

查找更多产品

公司简介

公司名称 KELK公司
位置 〒254-8543 神奈川県平塚市四之宮3-25-1
成立 1966年11月
资本金 3億9,000万円
(小松製作所100%子会社)
净销售额 非公開
员工人数 310人(2020年1月現在)

KELK公司
官方网站

主要产品

热电模块(帕尔贴元件)

应用示例

  • TOSA(XMD、TO-Can等)
  • 可调激光器,iTLA,Micro iTLA
  • Pump激光
  • Inp调制器
  • 量子级/量子点激光器
  • 激光雷达
  • CMOS、CCD 传感器
  • DNA诊断设备
  • 光纤激光器

热电发电

利用废热发电

  • 不需要电池或电源的振动传感器设备(通过傅立叶分析进行故障预测诊断的设备)
  • 不需要电源的各种 IoT 传感器

热电制冷模块产品介绍

KELK的热电制冷模块(帕尔贴元件)及单个制冷器模块通过在广泛的领域的应用及丰富的经验证实,KELK的产品凭借高性价比和高可靠性得到广大客户的高度评价。

如何选择TEC

Example)
For 12W of heat load , It is expected to keep -3°C at low temperature side of single module(Tc). The hot side temperature (Th) is supposed to be kept at 50°C by using a proper heat sink.

- -
- -

微型制冷器

微型制冷器

主要应用于光通信行业,针对功耗较小的激光器等小型部件实现合适温度控制。
KELK微型制冷器全部采用本公司特有的高性能热压成型材料,由自动化机器人组装。
所有产品均符合Telcordia规格标准。
所有产品均为无铅产品。
尺寸、电流、制冷量、各种焊料及金属化层,可根据客户需求进行定制。

微型制冷器列表

微型制冷器列表 (PDF : 124KB)
微型制冷器列表
This table is scrollable.
Imax: Maximum current
Current at Δtmax, Qc=0
Vmax: Maximum terminal voltage
Terminal voltage at Imax, Δtmax and QC=0
Δtmax: Maximum temperature difference
Tempereture difference between the cold side and the hot side and the hot side ceramics
Qcmax: Maximum heat pumped at the cold side
Heat pumped at Imax, ΔT=0
Th: Hot side ceramics temperature
Ceramics teperature at the hot side

超微型制冷器

超微型制冷器

为满足近年器件及制冷器小型化的发展趋势,KELK开发了比微型制冷器更小的超微型产品。
所有产品均符合Telcordia规格标准。
所有产品均为无铅产品。

焊盘型

引线型

超微型制冷器列表

超微型制冷器列表 (PDF : 112KB)
超微型制冷器列表
This table is scrollable.
Imax: Maximum current
Current at Δtmax, Qc=0
Vmax: Maximum terminal voltage
Terminal voltage at Imax, Δtmax and QC=0
Δtmax: Maximum temperature difference
Tempereture difference between the cold side and the hot side and the hot side ceramics
Qcmax: Maximum heat pumped at the cold side
Heat pumped at Imax, ΔT=0
Th: Hot side ceramics temperature
Ceramics teperature at the hot side

多用途制冷器

多用途制冷器

应用于红外传感、激光、理化设备等需要大型、高热量用途的制冷器模块。
标准的多用途制冷器通常使用溶质材料,如需更大温差(ΔT)更低功耗的产品,也可使用高性能的热压成型材料。
所有产品均为无铅产品。

多用途制冷器列表

多用途制冷器列表 (PDF : 113KB)
多用途制冷器列表
This table is scrollable.
Imax: Maximum current
Current at Δtmax, Qc=0
Vmax: Maximum terminal voltage
Terminal voltage at Imax, Δtmax and QC=0
Δtmax: Maximum temperature difference
Tempereture difference between the cold side and the hot side and the hot side ceramics
Qcmax: Maximum heat pumped at the cold side
Heat pumped at Imax, ΔT=0
Th: Hot side ceramics temperature
Ceramics teperature at the hot side

多级制冷器

多级制冷器

应用于CCD,光传感等需要零下温度的产品应用。
多级制冷器通过将制冷器模块进行层叠,可获得更大的温差(ΔT)。
使用高性能热压成型材料,可产生更低的温度。

多级制冷器列表

多级制冷器列表 (PDF : 110KB)
多级制冷器列表
This table is scrollable.
Imax: Maximum current
Current at Δtmax, Qc=0
Vmax: Maximum terminal voltage
Terminal voltage at Imax, Δtmax and QC=0
Δtmax: Maximum temperature difference
Tempereture difference between the cold side and the hot side and the hot side ceramics
Qcmax: Maximum heat pumped at the cold side
Heat pumped at Imax, ΔT=0
Th: Hot side ceramics temperature
Ceramics teperature at the hot side

产品组合

开发

ELSFP CW光源-标准品TEC

  1. 高Qc特性的TEC PN结的设计

    Performance and Geometric Property of KSBB015-0705C

    Performance curve of KSBB015-0705C Th = 70℃

  2. 以标准设计实现TEC的低成本
  3. 通过PM光纤连接Gold Box Snout,光学耦合更为可靠

先进的技术

  • 低功耗
  • 最小化耦合损耗
  • 简化光学元件的组装
  • 最大化模块性能

专业技术

  • 利用超过50年的经验和知识,先进的仿真技术合适规格提案
  • 通过与亚洲地区的合作伙伴合作和将部分工序采用外协对应,来实降低成本、缩短 L/T 并提高稼动率
返回上层