Skip to main content
The EA1000VX is designed to meet the recent requirements for environmental regulation; easily and quickly measuring hazardous substances. High-speed measurement and various new functions greatly improve inspection efficiency.
Measurement time has been dramatically improved over standard instruments: one tenth for metal samples and one third for plastic samples compared with the conventional model SEA1000AII. This results in far greater overall throughput.
Note: Total measurement time is defined as the time required to reach a detection limit of 20ppm for Cd, and 100ppm for other elements (measured under Hitachi High-Tech's recommended conditions).
|Cd, Pb, Hg, Br, Cr|
|Cd, Pb, Hg, Cr|
in high concentration BrSb plastics
|Cd, Pb, Hg, Br, Cr|
|EA1000VX||Approximately 30 sec||Within 120 sec||Within 200 sec|
|SEA1000AII||Approximately 100 sec||Within 360 sec||More than 2,000 sec|
Table.1 Measurement time using the EA1000VX and SEA1000AII.
The EA1000VX is equipped with the world's best high count rate detector "Vortex" which detects at a rate of 150,000 cps and does not require LN2, resulting in an unprecedented level of sensitivity and resolution.
The software automatically dertermines the sample materials and selects suitable inspection condition.
The user can monitor the measurement status via the progress bar on the Operation Panel as well as the sound indicators.
A variety of standard reference samples developed and manufactured in-house are available; those include not only for the RoHS restricted elements (Cd, Pb, Hg, Br, and Cr), but also for other elements such as chlorine (Cl), antimony (Sb) and tin (Sn) and so forth.
The optional sample changer enables the continuous measurements of up to 12 samples.
Software manages the data (retrieval, browsing, analysis, editing, printing, and report preparation) measured by one or more instruments, allowing higher inspection efficiency and cost reduction.
|Measurable Elements||Atomic Number: 13 (Al) to 92 (U)|
|Sample state||Solid / Powder / Liquid|
|X-ray tube||X-ray tube (Rh target)
Voltage: 15 kV, 50 kV
Current: 1 mA (10 μA to 1,000 μA variable)
|Detector||Vortex® (SDD) *No liquid nitrogen required|
|Measurement Area||1 mmφ、3 mmφ、5 mmφ（Electric switching)|
|Sample Observation||Color CCD camera|
|Sample Chamber||370(W) × 320(D) × 120(H) mm|
|Filter||5 filters automatic switching (including OFF)|
|Operation||Laptop or Desktop PC|
|Data Processing||Microsoft Excel, Microsoft Word|
|Utility||AC 100 V to 240 V ±10%, Single phase|
|Accessory||Sample Cup 2 types for liquid and tiny samples|
The trademark that represents our strong bond with the customer and shows our pledge to connect science and society to create new value.